Vintageview IDR7 - 7 Island Display Rack Package User Manual download pdf

7’ Island Display Rack (IDR7)

Assembly Instructions

Wine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: 866.650.1500 • fax: 866.650.1501

Please feel free to contact us regarding the assembly of this product.

2. Attach racks to frame - Using two 3 bottle deep base cradling

racks, and starting with the bottom three cross rails at the left side

of the assembled frame, align the mounting holes in the racks with

the holes on crossrails. Temporarily place alignment tool through

center hole in rst rack, crossrail and the center hole in second

rack, as shown. Attach racks to crossrails as shown. After securing

top and bottom of racks, remove alignment tool and replace with

assembly screw. Repeat for each rack set, alternating between

base and neck sets. Then, move on to the upper three crossrails

and install the 2 bottle deep racks in the same fashion.

1. Assemble frame - Insert and hold a footer pad nut inside the tube,

aligned with the pre-drilled hole, and thread the footer pad into the

nut. Tighten all of the footer pads with a 14mm wrench. Lay down

one upright and attach all six crossrails using the provided crossrail

assembly screws in the predrilled mounting holes noted below. Do not

fully tighten at this point to allow for adjustments during assembly.

Stand up the rst upright and attach the second upright to crossrails.

†

IDR Extension packages contain only 1/2 the quantity of noted items.

Hardware shown

actual size

6 X

WS33

4 X

†

Footer Pad

6 X

IDR-CR3

1 X

IDR-PR

2 X

†

IDR7-UPRIGHT

24 X

Crossrail Assembly

Screw

3 X

IDR-PR Assembly

Screws

36 X

WS Assembly

Screw

2 X

†

IDR-PR Assembly Bolt

4 X

†

IDR-PR Assembly

Washer

6 X

WS32

Footer

Pad Nut

4 X

†

Attach

Crossrails Here

Attach

Crossrails Here

Required tools: 2 X 14mm (or adjustable) Wrench

Electric Screw Driver with #2 Phillips Bit

IDR-AK - included with IDR and contains an

8mm Nut Driver and Alignment Tool

1 2

Assembly Instructions 1

Summary of Contents

Page 1 - Assembly Instructions

7’ Island Display Rack (IDR7) Assembly InstructionsWine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: 866.650.1500 • fax: 866.650

Page 2

3. Assemble presentation rack – Position presentation racks back to back as shown. Using the nut driver (included) and a Phillips head screwdri

Comments to this Manuals

No comments

Vintageview IDR7 - 7 Island Display Rack Package User Manual

Browse online or download User Manual for Equipment Vintageview IDR7 - 7 Island Display Rack Package. VintageView IDR7 - 7 Island Display Rack Package User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Vintageview IDR7 - 7 Island Display Rack Package